Filter
Top Products
11
PC1
PC2
PC3 PC4
(PRIMARY)
0 to 100% of the left of PC2 goes to 0 to 100% of PC1-Primary
0 to 100% of the bottom of PC2 goes to 0 to 100% of PC4
0 to 100% of the right of PC1-Primary goes to 0 to 100% of PC2
0 to 100% of the bottom of PC1-Primary goes to 0 to 100% of PC3
0 to 100% of the top of PC3 goes to 0 to 100% of PC1-Primary
0 to 100% of the right of PC3 goes to 0 to 100% of PC4
0 to 100% of the top of PC4 goes to 0 to 100% of PC2
0 to 100% of the left of PC4 goes to 0 to 100% of PC3
PC1
PC2
PC3 PC4
(PRIMARY)
0 to 100% of the left of PC4 goes to 0 to 100% of PC3
0 to 100% of the right of PC4 goes to 0 to 100% of PC1-Primary*
0 to 100% of the left of PC3 goes to 0 to 100% of PC2
0 to 100% of the right of PC3 goes to 0 to 100% of PC4
0 to 100% of the left of PC1-Primary goes to 0 to 100% of PC4*
0 to 100% of the right of PC1-Primary goes to 0 to 100% of PC2
0 to 100% of the left of PC2 goes to 0 to 100% of PC1-Primary
0 to 100% of the right of PC2 goes to 0 to 100% of PC3
Set up examples for positional relationships
14 When all of the screen switching entries have been entered, click the OK
button to return to the main window. Now choose the Serial Port on the
primary computer to which the Adder TS4 serial cable is connected.
15 On each client system, select the ‘Use this computer as a client’ radio
button and enter the Screen Name (Hostname) of the primary system in the
‘Name of Server’ field.
Tip: To confirm that each client can see the server on the network, open
the Windows Command Prompt and enter: ping <server hostname>. If the
server can be seen, you will see replies to each outgoing message listed
within the Command Prompt window. This test can also be performed from
the server system to verify each of the clients.
16 On every system you now need to determine when Synchrony should start.
Depending on your access rights on each system, you can choose to launch
Synchrony either:
• When the system first starts up, or
• When you log in.
Click the ‘AutoStart...’ button to display the following dialog:
The application will check your current login status and present the
available choices to you.
* Leave out these two
entries if you don’t need to
wrap around at each end
Screens arranged
in a square
formation
Screens
arranged
in a row
17 Click the relevant Install button and then click the Close button to return to
the main window.
You can now either click the Start button to begin each Synchrony session
immediately or wait until each system is next restarted. The taskbar on the
server system will begin greyed out and will become coloured once
the client systems are located.
In operation, as the mouse exceeds the boundary of one screen, the Adder
TS4 unit should switch across to the next system and screen.