Filter
Top Products
Chapter 5: Configuration
42 ISU 512 User Manual 61202.086L1-1
SETTING DTE OPTIONS
The DTE Options menu is used to select the configuration parameters that con-
trol the operation of the DTE interface ports of the ISU 512, such as the maxi-
mum bit rate and the connector type. Changes to the DTE options affect both
ports (RS-530 and V.35) during dual-port mode and single-port modes of op-
eration.
Maximum Bit Rate
The DTE bit rate can be set for 64K MODE 1 or 56K MODE 1. After selecting
the maximum bit rate (Max Bit Rate), 64K MODE 1 or 56K MODE 1 blinks
to indicate the call type set under network, dial line options. Choosing 64K
MODE 1 changes the call type setting to Data 64kbps. Choosing 56K MODE
1 changes the call type setting to Data 56kbps. After selecting 64K Mode 1 or
56K Mode 1, options are available for selecting multiples of the call type:
3=CONFIG
2=DTE options
1=Max Bit Rate
1=64K Mode1
1=1x64K
2=2x64K
3=3x64K
4=4x64K
5=5x64K
6=6x64K
7=7x64K
8=8x64K
2=56K Mode1
1=1x56K
2=2x56K
3=3x56K
4=4x56K
5=5x56K
6=6x56K
7=7x56K
8=8x64K