Filter
Top Products
Chapter 8. Telnet/Terminal Menus
61202129L1-1 TSU 120 User Manual
8-3
You can use the
A
RROW
K
EYS
or Number Keys to move the cur-
sor from one selection to another. Use the
Enter Key to perform
the action displayed in the LCD to the right of the cursor.
Map Configuration
Map configuration consists of the following steps:
Initializing the Temp Map
Upon entering the DS0 maps configuration menu, the Temp
map reflects its last configured state.
Step Action
1 Initialize the Temp Map to one of three
configurations:
•Current Map A
•Current Map B
• All Idles
This step is optional.
2 Edit the Temp Map so that it reflects the desired
map configuration.
3 Replace the current DS0 Map A or Map B
configuration with the Temp Map configuration.
If you want to... Use these selections...
initialize the displayed Temp Map to
one of three configurations.
1 - 3
initialize the Temp Map from its
current configuration to one which
reflects the currently stored Map A or
B configurations, respectively.
1 , 2
initialize the Temp Map to an all
IDLE state.
3