Filter
Top Products
Chapter 8. Telnet/Terminal Menus
8-4
TSU 120 User Manual 61202129L1-1
Editing the Temp Map
To edit the Temp Map, follow these steps.
Applying the Temp Map
Once the Temp map reflects the desired configuration, use
Selections 8
or
9
to apply this configuration to Map A or B,
respectively.
Reviewing Maps
Selections 4
through
6
give a summary of the number of ports
assigned to Map A, Map B, and the Temp Map, respectively.
Step Action
1 To make additional changes to the Temp Map, use
Selection
7 to enter the Temp Map edit mode.
Explanation:
Upon entering this mode, the cursor location moves to DS0
number one in the DS0 field of the Temp Map. The cursor
may be moved from one DS0 to another using the
Arrow
Keys
until it is located at the DS0 number whose assigned
port needs to be changed.
2 Press the
Enter Key to move the cursor to the Port field
3 Use the
Arrow Keys to scroll through the possible port
selections.
4 Press the
Esc Key to restore the previous port assignment
and return to the DS0 field.
5 Press the
Enter Key to save the current selected port and
return to the DS0 field.
Explanation:
Once the cursor is again located in the Temp Map DS0 field,
pressing the
Esc Key a second time, causes the cursor to
return to
Selection 1
below the Temp Map display.