Filter
Top Products
Chapter 5. Configuration Menu
5-20
TSU 120 User Manual 61202129L1-1
Table 5-1. Normal Mode of Operation
INBAND MODE The Nx56/64 port is capable of providing an
inband communications channel (for T-
Watch and SNMP) between units. This is
accomplished by using 8 kbps of the first DS0
assigned to that particular Nx56/64 port. If
in 56 K mode, no data bandwidth will be
used. Inband must also be enabled at the
destination port.
Choices: On, Off, On Demand
TX CLK SOURCE This controls the source of the clock used by
the TSU 120 to accept transmit data from the
DTE. The default is
INTERNAL
. If the
application requires that the DTE device
provides the clock with the transmit data, the
EXTERNAL
setting is used.
Choices: Internal, External
Signal RTS V.54 Loop-
back
511 TST
ON
Self Test
Active
Netwk Test
Active
No DS0
Mapped
Network
Alarm
CTS Follows OFF OFF OFF OFF OFF OFF
DCD — — — OFF — OFF OFF
DSR — OFF OFF OFF OFF OFF —
Where “—” = don’t care
*Until backup becomes active
Menu Item Description