Filter
Top Products
Chapter 8. Telnet/Terminal Menus
61202129L1-1 TSU 120 User Manual
8-9
System Location
A text string describing the physical location of an SNMP man-
aged node (for example,
SECOND FLOOR PBX ROOM
).
Auth. Fail Traps Sent
(
DISABLED, ENABLED
: defaults to
DISABLED
)
When enabled, the TSU 120 issues an SNMP trap when any
SNMP request is received with an invalid community name.
Can be used for security purposes.
Poll Link Status Traps Sent
(
DISABLED
,
ENABLED
, defaults to
DISABLED
). When enabled,
the TSU 120 sends an SNMP trap whenever a device config-
ured to be polled fails to respond. When the device begins
responding to polls, a poll link-up trap is sent. The format of
the traps are defined in the agent MIB.
Ping IP Host
Allows the user to Ping a specific IP address.
Telnet/Terminal Timeout
The TSU 120 terminates a TELNET or Terminal session if no
activity is detected for this length of time. Only one TELNET or
Terminal session may be active at one time. This timeout pre-
vents an unattended session from blocking interactive access to
the agent. The default value is five minutes.
Telnet/Terminal Password
This option allows modification of the password required for
entry into a TELNET or Terminal session. The default value is
ADTRAN.
Exit
Returns to the TSU 120 Main menu.