Filter
Top Products
Chapter 8. Telnet/Terminal Menus
61202129L1-1 TSU 120 User Manual
8-7
Modify Unit
Allows
U
NIT
ID
,
P
ASSCODE
,
D
EVICE
T
YPE
, and
P
OLLED
F
LAG
to
be changed for an existing entry in the table.
Delete Unit
Deletes an entry in the table.
Default Unit Passcode
Sets the default passcode for all devices in the table that have
passcodes set to
DEFAULT
, or for any unit not listed in the table.
OK
Returns to the Configure Agent menu.
SNMP Read Community
• SNMP Read Community Name defaults to
public
.
• NMSs using this community name have read access for all
supported MIB objects, but do not have the ability to change
MIB objects.
• This value must be set to the same value on both the TSU
120 and the NMS (OpenView®, etc.) in order for the NMS
to have read access to MIBs supported by the TSU 120.
• This value must be a text string of 16 characters or less.
SNMP Read/Write Community
• SNMP NMS using this community name have full read/
write access to all supported MIB objects (defaults to pri-
vate).
• This setting must be the same value on both the TSU 120
and the NMS in order for the NMS to have
read/write ac-
cess to MIBS supported by the TSU 120.
• This value must be a text string that is 16 characters or less.