Filter
Top Products
TA 544 User Manual © 2001, ADTRAN, Inc.
TA 544 User Manual/61200704L1-1A
Page 26 of 68
Use the ATM C
ONFIG
menu (Figure 7) to set the parameters listed below the figure.
Figure 7. ATM Config Menu
Idle Cells
The I
DLE
C
ELLS
format must be configured for either ATM F
ORUM
or ITU. Configuring this setting incor-
rectly for a particular circuit will cause poor performance at the ATM layer.
Data Scrambling
D
ATA
S
CRAMBLING
can be E
NABLED
or D
ISABLED
for cell traffic. Configuring this setting incorrectly for a
particular circuit will cause poor performance.
>ATMStats
Use the W
AN
menu (Figure 6 on page 25) to access the ATM S
TATS
menu (Figure 8 on page 27) and view the param-
eters listed below the figure.
This setting must match the configuration setting of the ATM switch or DSLAM at the other end of
the circuit.
This setting must match the configuration setting of the ATM switch or DSLAM at the other end of
the circuit.