Filter
Top Products
TA 544 User Manual © 2001, ADTRAN, Inc.
TA 544 User Manual/61200704L1-1A
Page 46 of 68
Managing the Modules –V.35 Setup
Use the V.35 S
ETUP
menu to view and set the parameters shown in Figure 18.
Figure 18. V.35 Setup Menu
C
HANNEL
R
ATE
and EIA settings are supported via this menu option. For all typical applications, these settings are
left in their default states.
>ATM/FRIWF
This menu contains the setup and status for the ATM/Frame Relay interworking functions.
Mode
The M
ODE
setting configures the V.35 port for FRF5 or FRF8 operation, depending upon the application
being supported.
FRF5
This is also known as Network Interworking. Use this mode for Frame Relay over ATM.
FRF8
This is also known as Service Interworking. In this mode, the TA 544 performs a translation between
Frame Relay and ATM protocols.
Configuration
The C
ONFIGURATION
menu is used to support the configuration of Frame-to-ATM interworking, signaling
formats, timeout values, and PVC settings.