Filter
Top Products
TA 544 User Manual/61200704L1-1A
Page 67 of 68
© 2001, ADTRAN, Inc. TA 544 User Manual
Appendix H. RFC1483 Quick Start (Bridging)
The TA 544 allows for complete integration of voice and data delivery from one compact platform. Once you have
completed the voice turn up procedure from the previous example, adding data to the circuit requires some additional
setup.
To configure a TA 544 for Bridging, you need to know the VPI and VCI values for the data circuit on your network.
Bridging
Step Action
1
From the TA 544 main menu, select the
W
AN
menu. (Here you set up
the ATM network.)
2
Select the
ATM C
ONFIG
menu.
3 Enter the
I
DLE
C
ELLS
format for your network.
4 Set D
ATA SCRAMBLING
appropriately for your network.
5
Back all the way out to the top level TA 544 menu, and then select the
R
OUTER
menu.
6
Enter the
C
ONFIGURATION
menu.
From this menu, you will set up addresses for your LAN and WAN.
For basic IP routing, use all the default values from the
G
LOBAL
menu.
7
From the E
THERNET
menu, enter the
IP
menu to enter your LAN
configuration.
8
Enter your LAN
IP
ADDRESS
and
S
UBNET
M
ASK
.
For this example, the
IP
ADDRESS
is 192.168.1.2 and the
S
UBNET
M
ASK
is 255.255.255.0. This is not required, but will allow Telnet configuration
and TFTP upgrades from the LAN.
9
Arrow back to the main R
OUTER
C
ONFIGURATION
menu, and select the
WAN
menu and then the ATM menu. (Here you will enter your data
PVC information.)
10
Create a new PVC by entering the menu. Enter your VPI and VCI
values.
11
Disable IP on the RFC1483 IP menu and enable Bridging on the
RFC1483 B
RIDGE
menu. (This enables the TA 544 as a bridge.)
12
Arrow back to the top level TA 544 menu to activate your changes.
All packets that come in on the Ethernet will be forwarded on the WAN.