Filter
Top Products
TA 544 User Manual © 2001, ADTRAN, Inc.
TA 544 User Manual/61200704L1-1A
Page 40 of 68
Configuring the Router – Status
Use the R
OUTER
/S
TATUS
menu to view and set the parameters shown in Figure 13. The R
OUTER
/S
TATUS
screens give the user useful information for debugging the current routes in the TA 544.
Figure 13. Router/Status Menu
> Session
This menu maintains statistics about the active ATM PVCs.
> ARP cache
This is a listing of the currently connected Ethernet port on the LAN.
> Bridge Table
This shows the detected MAC addresses and the interface to which they are associated.
> IP Routes
This shows the current routes in theTA 544 and their use.
LAN-
TO
-WAN (O
UT
)
The packets which come out toward the
WAN from the TA 544 can be filtered in
three ways:
D
ISABLED
(
DEF
)
Turns off packet output filtering. No
outgoing packets are blocked.
B
LOCK
A
LL
All outgoing packetsto theWAN are blocked
except as defined in the
FILTERS/OUT
E
XCEPTIONS
list.
F
ORWARD
A
LL
All outgoing packets to the WAN are not
blocked except as defined in the
FILTERS/
OUT E
XCEPTIONS
list.
OUT E
XCEPTIONS
This is a list of up to 32 entries. The setup is exactly
thesameasthe
F
ILTERS
/OUT E
XCEPTIONS
list.