Filter
Top Products
Chapter 3 Award BIOS Setup
43
3.6.3 Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+ Blank This will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the
video buffer.
Blank Screen This only writes blanks to the video buffer.
DPMS Initial display power management signaling.
3.6.4 MODEM Use IRQ
This determines the IRQ in which the MODEM can be used.
The default is “3”.
3.6.5 HDD Power Down
You can choose to turn the HDD off after a one of the time interval
listed, or when the system is in Suspend mode. If in a power saving
mode, any access to the HDD will wake it up.
Note: The HDD will not power down if the Power Manage-
ment option is disabled.
3.6.6 ZZ Active in Suspend
In this mode, SRAM will enter a low-power state.
3.6.7 PCI/VGA Act-Monitor
In you enable this option, any video activity will restart the global
timer for standby mode.