Filter
Top Products
52
PCA-6359 Series User's Manual
4.1 Introduction
The PCA-6359V/VE/F has an onboard PCI flat panel/VGA interface.
The specifications and features are described as follows:
4.1.1 Chipset
The PCA-6359V/VE/F uses a C&T 69000 chipset for its PCI/SVGA
controller. It supports many popular LCD, EL, and gas plasma flat
panel displays and conventional analog CRT monitors. The 69000
VGA BIOS supports monochrome LCD, EL, color TFT and STN
LCD flat panel displays. In addition, it also supports interlaced and
non-interlaced analog monitors (color and monochrome VGA) in
high-resolution modes while maintaining complete IBM VGA
compatibility. Digital monitors (i.e. MDA, CGA, and EGA) are NOT
supported. Multiple frequency (multisync) monitors are handled as if
they were analog monitors.
4.1.2 Display memory
With onboard 2 MB display memory, the VGA controller can drive
CRT displays or color panel displays with resolutions up to 1024 x
768 at 64 K colors. The display memory can be expanded to 4 MB for
true-color resolution of 1024 x 768 with C&T 69030 upon request.
4.1.3 Display types
CRT and panel displays can be used simultaneously. The
PCA-6359V/VE/F can be set in one of three configurations: on a
CRT, on a flat panel display, or on both simultaneously. The system is
initially set to simultaneous display mode. The utility disks include
three *.COM files in the subdirectory Utility\vga\ which can be
used to configure the display. In order to use these configuration
programs, type the file name and path at the DOS prompt.
CT.COM: Enables CRT display only
FP.COM: Enables panel display only
SM.COM: Enables both displays simultaneously