Filter
Top Products
48
PCA-6359 Series User's Manual
3.10.3 On-Chip PCI IDE Primary/Secondary
You can enable the Primary IDE channel and/or the Secondary IDE
channel. Any channel not enabled is disabled. This field is for systems
with only SCSI drives.
3.10.4 Onboard FDC Controller
When enabled, this field allows you to connect your floppy disk
drives to the on-board floppy disk drive connector instead of a
separate controller card. If you want to use a different controller card
to connect the floppy disk drives, set this field to Disabled.
3.10.5 Onboard Serial Port 1 (3F8H/IRQ4)
The settings are 3F8H/IRQ4, 2F8H/IRQ3, 3E8H/IRQ4, 2E8H/IRQ10,
and Disabled for the on-board serial connector.
3.10.6 Onboard Serial Port 2 (2F8H/IRQ3)
The settings are 3F8H/IRQ4, 2F8H/IRQ3, 3E8H/IRQ4, 2E8H/IRQ10,
and Disabled for the onboard serial connector.
3.10.7 UART Mode Select
The item allows you to determine the Infrared (IR) function of the
onboard I/O chip. The default setting is Normal.
3.10.8 UART2 Duplex Mode
You can select the IR function when your UART2 Mode is ASKIR.
3.10.9 RxD, TxD Active
This item allows you to determine the activity of RxD and TxD.