Filter
Top Products
116
PPC-150 User's Manual
WDT Active When Power ON
This is Advantech's patented watchdog function which can reboot the
system should the computer hang in the BIOS checkup.
The options are: 63 sec (Default), Disabled, 31 sec, 15 sec.
Onboard Serial Ports 1 & 2
If the serial ports use the onboard I/O controller, you can modify your
serial port parameters.
The options for Port 1 are: 3F8/IRQ4 (Default), 2E8/IRQ3, Disabled,
2F8/IRQ3, 3E8/IRQ4.
The options for Port 2 are: 2F8/IRQ3 (Default), 3E8/IRQ4, 2E8/IRQ3,
Disabled, 3F8/IRQ4.
IR Address Select
When enabled, the infrared receptor is activated.
The options are: Disabled (Default), Enabled.
Onboard Serial Ports 3 & 4
If the serial ports use the onboard I/O controller, you can modify your
serial port parameters.
The options for Port 3 are: 3E8/IRQ10 (Default), 2E8/IRQ5, Disabled.
The options for Port 4 are: 2E8/IRQ5 (Default), Disabled, 3E8/IRQ10.
Onboard Parallel Port
If the parallel port uses the onboard I/O controller, you can modify your
parallel port paramaters. When you select "Disabled", the next two setup
items will disappear.
The options are: 378/IRQ7 (Default), 3BC/IRQ7, 278/IRQ5, Disabled.
Parallel Port Mode
You can choose different data transfer modes for your system.
The options are: ECP & EPP (Default), SPP, EPP, ECP.