Filter
Top Products
16
PPC-150 User's Manual
2.3 Installation Procedures
2.3.1 Connecting the power cord
The panel PC can only be powered by an AC electrical outlet (90 ~ 260
volts, 47 ~ 63 Hz). Be sure to always handle the power cords by holding
the plug ends only.
Follow these procedures in order:
1. Connect the female end of the power cord to the AC inlet of the panel
PC. (See Fig. 2-5.)
2. Connect the 3-pin male plug of the power cord to an electrical outlet.
Figure 2-5: Connecting the power cord
AC inlet
Electrical outlet
Power cord