Filter
Top Products
Chapter 8 Award BIOS Setup
93
TT
TT
T
ypematic Rate (Chars/Sec)ypematic Rate (Chars/Sec)
ypematic Rate (Chars/Sec)ypematic Rate (Chars/Sec)
ypematic Rate (Chars/Sec)
Sets the rate of a character repeat when the key is held down.
The options are: 6 (Default), 8, 10, 12, 15, 20, 24, 30.
TT
TT
T
ypematic Delay (msec)ypematic Delay (msec)
ypematic Delay (msec)ypematic Delay (msec)
ypematic Delay (msec)
Sets the delay time before a character is repeated.
The options are: 250 (Default), 500, 750, 1000 milliseconds.
Security OptionSecurity Option
Security OptionSecurity Option
Security Option
Allows you to set the security level of the system.
The options are: Setup (Default), System.
PCI/VGA Palette SnoopPCI/VGA Palette Snoop
PCI/VGA Palette SnoopPCI/VGA Palette Snoop
PCI/VGA Palette Snoop
When enabled, allows you to install an enhanced graphics adapter card. If
your graphics adapter card does not support the Palette Snoop function, set at
"Disabled" to avoid system malfunctions.
The options are: Disabled (Default), Enabled.
OS Select For DRAM > 64MBOS Select For DRAM > 64MB
OS Select For DRAM > 64MBOS Select For DRAM > 64MB
OS Select For DRAM > 64MB
If your operating system (OS) is OS2, select "OS2". Otherwise, stay with the
default setting Non-OS2.
VV
VV
V
ideo BIOS Shadowideo BIOS Shadow
ideo BIOS Shadowideo BIOS Shadow
ideo BIOS Shadow
When enabled, allows the BIOS to copy the video ROM code of the add-on
video card to the system memory, giving faster access.
The options are: Enabled (Default), Disabled.
C8000-CBFFF Shadow thrC8000-CBFFF Shadow thr
C8000-CBFFF Shadow thrC8000-CBFFF Shadow thr
C8000-CBFFF Shadow thr
ough to DC000-DFFFF Shadowough to DC000-DFFFF Shadow
ough to DC000-DFFFF Shadowough to DC000-DFFFF Shadow
ough to DC000-DFFFF Shadow
When enabled, allows the BIOS to copy the BIOS ROM code of the add-on
card to the system memory for faster access. It may improve the performance
of the add-on card. Some add-on cards will not function properly if their
BIOS ROM codes are shadowed. To use this option correctly, you need to
know the memory address range used by the BIOS ROM of each add-on
card.The options are: Disabled (Default), Enabled.