46
PPC-A84 User's Manual
4.1 Introduction
The PPC-A84 is equipped with a high performance 32-bit Ethernet chipset
which is fully compliant with IEEE 802.3 100 Mbps CSMA/CD standards. It
is supported by major network operating systems. It is also both 100Base-T
and 10Base-T compatible. The medium type can be configured via the
RSET8139.exe program included on the utility disk.
The Ethernet port provides a standard RJ-45 jack. The network boot feature
can be utilized by incorporating the boot ROM image files for the appropri-
ate network operating system. The boot ROM BIOS files are combined with
system BIOS, which can be enabled/disabled in the BIOS setup.
4.2 Installation of Ethernet Driver
Before installing the Ethernet driver, note the procedures below. You must
know which operating system you are using in your PPC-A84, and then refer
to the corresponding installation flow chart. Then just follow the steps
described in the flow chart. You will quickly and successfully complete the
installation, even if you are not familiar with instructions for WINDOWS.
Note 1: The windows illustrations in this chapter are examples only.
You must follow the flow chart instructions and pay atten-
tion to the instructions which then appear on your screen.
Note 2: The CD-ROM drive is designated as "D" throughout this
chapter.
Note 3: <Enter> means pressing the "Enter" key on the keyboard.