Filter
Top Products
102
PPC-A84T User's Manual
The options for Port 3 are: 3E8/IRQ10 (Default), 2E8/IRQ5, Disabled.
The options for Port 4 are: 2E8/IRQ5 (Default), Disabled, 3E8/IRQ10.
8.11 Password Setting
To enable the password setting, select the item from the Standard CMOS
Setup. You will be prompted to create your own password. Type your
password up to eight characters and press "Enter". You will be asked to
confirm the password. Type the password again and press "Enter". You may
also press "Esc" to abort the selection and not enter a password. To disable
the password, press "Enter" when you are prompted to enter the password. A
message will appear, confirming the password is disabled.
Under the BIOS Features setup, if "System" is selected under the Security
Option field and the Supervisor Password is enabled, you will be
prompted for the supervisor password every time you try to enter the CMOS
Setup utility. If "System" is selected and User Password is enabled, you will
be requested to enter the user password every time you reboot the system. If
"Setup" is selected under the Security Option field and User Password is
enabled, you will be prompted only when you reboot the system.
8.12 IDE HDD Auto Detection
The IDE Hard Disk Drive Auto Detection feature automatically
configures your new hard disk. Use it for quick configuration of new hard
disk drives. This feature allows you to set the parameters of up to four IDE
HDDs. The option with "(Y)" is recommended by the system BIOS. You
may also key in your own parameters instead of setting them
according to the system BIOS. After keying in all settings, press "Esc" to
return to the main menu. For confirmation, enter the Standard CMOS Setup
feature.