Filter
Top Products
68
PPC-A84 User's Manual
6.1 Introduction
6.1.1 General information
The PPC-A84's optional touchscreen incorporates advanced
second-generation 4-wire resistive technology. They allow 72% light
transmission respectively. The resistive model has an antiglare surface.
Anyway, this produces greatly enhanced visual resolution. They also have a
newly improved scratch-resistant features.
6.1.2 Specifications
Please refer to the chapter 1. All of the specifications of touchscreens can
be found in chapter1.2.
6.2 Installation of Touchscreen Driver
The touchscreen driver for Windows 95 contains a native, 32-bit driver
designed for Windows 95/98 and a 32-bit control panel program for the
PPC-A84 system.
To facilitate the installation of the touchscreen driver, you should read the
instructions in this chapter carefully before you attempt installation.
Note 1: The PPC-A84 uses the Dynapro 4-wire resistive touch-
screen eqipped with Ronics controller board and drivers.
When installing the touchscreen drivers, you will find the
drivers in RonicsTouch directory.
Note 2: The following windows illustrations are examples only. You
must follow the flow chart instructions and pay attention to
the instructions which then appear on your screen.
Note 3: The CD-ROM drive is designated as "D" throughout this
chapter.
Note 4: <Enter> means pressing the "Enter" key on the keyboard.