Filter
Top Products
Analyzing the PCI Local Bus
This chapter introduces you to the PCI Active Analysis Probe
and lists the minimum equipment required and accessories
supplied for PCI Local Bus analysis. This chapter also contains
information that is common to both state and timing analysis.
Before you use the PCI Analysis Probe software, make a
duplicate copy of the master diskette. Then store the master
diskette and use the back-up copy to configure your logic
analyzer. This will help prevent the possibility of losing or
destroying the original files in the event the diskette wears out, is
damaged, or a file is accidentally deleted.
Duplicating the
Master Diskette
To make a duplicate copy, use the Duplicate Diskette operation
in the disk menu of your logic analyzer. For more information,
refer to the reference manual for your logic analyzer.
The PCI Active Analysis Probe product consists of the following
accessories:
Accessories
Supplied
• The Analysis Probe interface hardware, which includes the
interface circuit module.
• one jumper which is installed on the circuit module.
• The inverse assembly and configuration software on a 3.5
inch diskette.
• 11 cables
• This operating manual
8