Filter
Top Products
Introduction
Probe Overview
7
Supported MIBs
The WanProbe uses SNMP, MIB-II, Agilent private MIB extensions, and selected
RMON MIB groups (groups 3,7,8, and 9) to provide the following features:
Alarms
Filters
Packet Capture
Events
Log
Trap
Signaling Layer Statistics
Signaling Layer Historical Statistics
Frame Relay Protocol Statistics
Frame Relay Historical Protocol Statistics
PPP* Protocol Statistics
PPP* Historical Protocol Statistics
Per PVC Frame Relay Protocol Statistics
Per PVC Frame Relay Historical Protocol Statistics
Per PVC PPP* Protocol Statistics
Per PVC PPP* Historical Protocol Statistics
* PPP refers to PPP, HDLC, or SDLC.
The WanProbe implements groups 3, 7, 8, and 9 of RFC 1757,the Remote
Network Monitoring Management Information Base (RMON-1 MIB). Refer to
the RFC for more information.
The WanProbe also implements the Agilent Private MIB, which contains all
WAN statistics and allows for configuration and administration of the probe. It
provides enhanced authentication features, specification of trap destinations,
remote download of new firmware revisions, serial line control, and other
features. The Agilent Private MIB is available electronically with NetMetrix.