Filter
Top Products
Local Terminal Configuration
Using the Main Menu
26
2. Press a number to select a field and then type the corresponding values
necessary to configure the probe to operate on your network.
Modify/View Interface Values Menu - Firmware Rev
MAC Address 00 00 C6 XX XX XX
Interface Type Ethernet
[1]Port 1.1 Ethernet
[2]Port Type Telemetry
[3]IP address 0.0.0.0
[4]Default gateway IP address 0.0.0.0
[5]Subnet mask 255.0.0.0
[6]Physical Connector RJ-45
[7]Link Speed Auto Negotiate
S.Save changes and exit
0.Cancel changes and exit
Figure 2-5: Modify/View Interface Values Menu (Fast Ethernet)