Filter
Top Products
Local Terminal Configuration
Using the Main Menu
24
Modify/View Security Values
To configure security values for probe access, you use the Modify/View Security
Values menu.
1. On the Main Menu, press
2
,
Modify/View security values
. You see the
Modify/View Security Values menu (Figure 2-4).
2. Press a number to select a field and then type the corresponding values
necessary to configure the probe to operate on your network. See “Access
Security” on page 8 for more information on security.
Allow Packet Press
1
and then type Yes to allow or No to not allow
Capture packet capture.
Allow TFTP Press
2
and then type Yes to allow or No to not allow
Firmware Downloads TFTP firmware downloading.
Modify/View Security Values Menu - Firmware Rev
[1]Allow packet capture Yes
[2]Allow TFTP firmware downloads Yes
[3]Allow Packet Generation Yes
[4]Allow duplicate and changed IP checking Yes
S.Save changes and exit
0.Cancel changes and exit
Figure 2-4: Modify/View Security Values Menu