Filter
Top Products
Operation and Features 2
U2751A User’s and Service Guide 35
SCPI Commands
The following examples show the SCPI commands for
executing the closing and opening of the relays.
Example 1, Make contact at channel 302
Example 2, Break contact at channel 302
Example 3, Make contact at channel 101, 302
-> *CLS; *RST // Resets the switch to the
default power-on state.
This command can be
ignored if this operation is
not required.
-> ROUTe:CLOSe (@302) // Closes the relay at row 3,
column 2.
-> ROUTe:OPEN (@302) // Opens the relay at row 3,
column 2.
-> ROUTe:CLOSe (@101,302) // Closes relays at row
1, column 1 and row
3, column 2.