Filter
Top Products
Albatron Anniversary Special Edition PX845PEV-800
17
Floppy Disk Connector: FDC
This mainboard provides a standard floppy disk connector (FDC) that supports 360K, 720K,
1.2M, 1.44M and 2.88M floppy diskettes. This connector supports the floppy drive ribbon
cables provided in the packaging.
Hard Disk Connectors: IDE1/ IDE2
This mainboard has a 32-bit Enhanced PCI IDE Controller that supports PIO Mode 0~4, Bus
Master, Ultra DMA / 33, Ultra DMA / 66,and Ultra DMA / 100. It has two HDD connectors,
IDE1 (primary) and IDE2 (secondary).
IDE1 (Primary IDE Connector)
You can connect up to two hard drives to IDE1. If you attach two drives, you must use a
ribbon cable with three connectors. You must also configure one drive as the master and one
drive as the slave, using the jumpers located on each drive.
IDE2 (Secondary IDE Connector)
The IDE2 controller can also support a Master and a Slave drive. The configuration is similar
to IDE1. The second drive on this controller must be set to slave mode.
Socket478
Intel
82801DB
U6
U17
BAT1
JP1
CASEOPEN
FDC
IDE2
IDE1
USB2 USB3
Phoenix
Bios
KB/MS
USB/LAN
PCI3
PCI5
LAN
CHIP
PCI4
Intel
82845PE
U10
AGP
PCI2
ATX
_
PWR
PRT/COM
Winbond
W83627HF
ATX_12V
PCI1
CPUFAN
AUXFAN
CHASFAN
DIMM1
DIMM2
DIMM3
SW/LED
SPEAKER
IrDA
IDE1IDE2
FDC