Filter
Top Products
Hardware Overview
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
13
Alcatel-Lucent
Beta Beta
OmniAccess 740 Hardware User’s Guide
USER MODULES
This section provides description about the modules/components that can be
installed by the user.
L
INE CARDS
All the line cards can be mounted on a single slot except the SE card, which
requires two slots. Next generation SE line cards may occupy a single slot only.
An overview of the line cards is given below.
S
ERVICES ENGINE
The SE card is the main data processing center in the chassis. The SE card has
two external auto-negotiable copper GigE ports. The GigE interfaces can auto-
negotiate, transmit, and receive data packets at the rate of 10/100/1000 Mbps.
The LEDs on the SE card indicate Active or Fault conditions. The LEDs on the
Gigabit Ethernet ports of the SE card indicate Link Status, Link Speed, and
Activity. The SE card is a dual slot line card, and is installed in slots 2, 3.
1. SE LEDs
2. GigE Ports
3. Thumb Screw
4. Left LED on the Ethernet Port
5. Right LED on the Ethernet Port
Figure 6: Services Engine
OA7-SE
3
2
54
1