Filter
Top Products
Connecting to the System Console Port
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
45
Alcatel-Lucent
Beta Beta
OmniAccess 740 Hardware User’s Guide
Step 2: Start your terminal emulation software.
Example: kermit or hyperterm terminal (if you are using Microsoft Windows
operating system) or minicom terminal (if you are using Unix/Linux operating
system).
Step 3: Set the console session as follows:
Table 20: Console Properties
Step 4: Watch for console message output or press the Enter key to get the
device prompt.
Parameter Value
Baud rate 9600
Parity None
Data Bits 8
Stop Bit 1
Flow control None