Filter
Top Products
Installing User Modules
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
39
Alcatel-Lucent
Beta Beta
OmniAccess 740 Hardware User’s Guide
INSTALLING USER MODULES
The following sections describe the procedure to install the user modules in your
OA-740.
INSTALLING LINE CARDS
Follow the procedure detailed below to install the line cards.
Caution: Always handle the line cards by the edges; do not touch the components or connector
pins.
Step 1: Insert the line cards in their respective slots (0, 1, 2, 3).
By default, SE card is installed in slots 2, 3. The other line cards can be installed in
slots 0, 1.
Step 2: Verify that the line card is rested on the guide and it rides smoothly in the
slot.
Step 3: Push the line card firmly and ensure that the card is fully inserted in its
respective slot and tighten the thumb screws.
Figure 13: Installing Services Engine
OA7-T1E1-4
OA7-6E-8
OA7-SE
OmniAccess
740
USB ModemConsole