Filter
Top Products
Connecting the System to the Network
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
51
Alcatel-Lucent
Beta Beta
OmniAccess 740 Hardware User’s Guide
CONNECTING THE SYSTEM TO THE NETWORK
This section details the procedure to connect to your OA-740 through the internal
or external network.
CONNECTING TO INTERNAL NETWORK
To access the OA-740 through hosts in internal network/LAN, you can use the
following:
• Accessing OA-740 Through GUI
• Connecting Through Telnet
• Connecting Through SSH
A
CCESSING OA-740 THROUGH GUI
Follow the procedure given below to access and configure the OA-740 through a
GUI.
Note: To access the OA-740 through the GUI, an IP interface must be configured in your
system.
Step 1: Configure IP address of an interface.
To configure an IP address of a given interface, follow the steps detailed in the
“Accessing OA-740 Through CLI” section of this document.
Step 2: Open a Web browser from your PC.
Step 3: In the address bar/field, type the IP address of the interface and press the
Enter key.
Example:
http://<ip address>
http://192.168.1.1/24
The login page for the Web GUI is displayed in the browser window.
Step 4: Enter the user name and password, and press the Enter key. This will
launch a web interface to configure your OA-740.
For further configuration of your OA-740, refer to the OmniAccess 700 Web GUI
User Guide provided in the OA-740 Documentation CD.