Filter
Top Products
www.aleratec.com
8
Using the USB Duplicator
Main Menu
Functions are selected with the arrow keys. The numbers correspond to the
Function listing in the previous section.
Copy
This function makes USB ash copies. The duplicator auto detects and
supports Synchronous, and Asynchronous methods of Copy.
Synchronous Copying
In Synchronous Copying all USB ash drives are copied simultaneously.
Synchronous Copying is used when the source data is larger than the system
buffer (256MB).
1. Load the source ash drive into the USB Duplicator. Use the UP or
DOWN arrow to scroll through the menu until Copy is displayed on
the LCD screen.
2. Press the OK button on the display panel. The LCD will display the
following status:
Note: The number beside “USB” is the capacity of the USB flash drive
in megabytes. The number to the right is the size occupied by files or
images.
3. Load the blank target ash drives into the USB Duplicator. The LCD
will display the number of blank media loaded and ready for copying.
USB(963M) 450M
0 ready
ESC
OK
ESC
OK
USB Duplicator
1. Copy
USB(963M) 450M
3 ready
ESC
OK
ENT
ESC
ENT
ESC
ENT
ESC