Filter
Top Products
www.aleratec.com
22
Using the USB Duplicator
6.2 Measure Speed
This function will measure the read and write speeds of drives loaded in the
ports.
1. Load drives. Use UP or DOWN arrow to scroll through the menu until
Utility is displayed on the LCD screen. Press the OK button to select or
press ESC to go to the next setting.
2. Press OK and scroll to Measure Speed. The LCD will display the
following status:
3. Use the UP and Down arrow keys to check each drive.
6.3 Media Check
This function is used to check ash drives with the controller. There are
2 types of checks that can be performed. Safe and Normal. The area to be
examined can be set for each check.
1. Load drives. Use UP or DOWN arrow to scroll through the menu until
Utility is displayed on the LCD screen. Press the OK button to select or
press ESC to go to the next setting.
ESC
OK
USB Duplicator
6. Utility
ESC
OK
[Utility]
2. Measure Speed
ESC
OK
[#2] Read: 21.7MB
Write: 10.7 MB
Port position
ESC
OK
USB Duplicator
6. Utility