Filter
Top Products
www.aleratec.com
28
Using the USB Duplicator
7.1 Startup Menu
Startup Menu allows you to select which function displays rst when the USB
Duplicator is turned on.
This function selects the menu item that will be the rst item shown on the
display when you turn on the duplicator. The default setting is Copy.
1. Use the UP or DOWN arrow to scroll through the menu until Setup is
displayed on the LCD screen. Press OK.
2. Use the UP or Down arrow to scroll through the Setup options until Startup
Menu is displayed on the LCD screen.
7.2 Copy Area
This function supports the selection of Quick Copy or Copy whole area of the
source.
7.2.1 Only Data area – Quick Copy
If the controller system can verify FAT 16, 32, NTFS, Linux Ext 2, Ext
3 format for the source, the system will copy just the data area when
this function is selected. If it cannot verify the format, the system will
automatically copy the whole area of the source. For example, if a 2GB
source is FAT 32 and it has 50MB of data, the system will copy only the
50MB of data.
7.2.2 Whole area – Controller will copy whole area of the source.
If the source is not FAT 16, 32, NTFS, Linux Ext 2, Ext 3 format, the
system will copy the entire media, even the blank area. When this function
is selected, Quick Copy will not be used. The copy process takes longer.
ESC
OK
USB Duplicator
7. Setup
ESC
OK
7. Setup:
1. Startup Menu
ESC
OK
Startup Menu
1. Copy