Filter
Top Products
www.aleratec.com
17
Using the USB Duplicator
Asynchronous Copy+Compare - continued
4. If the Copy fails, the LCD will display the number of ash drives that
failed and passed.
Note: During Asynchronous Copying you can use the UP and DOWN
arrow keys to check each flash drives copying status.
5. When Copy is complete the Compare portion will automatically begin.
The LCD will display the status of the copying process.
6. When Compare is complete the display will show the total, and the
number that pass and fail.
When Copy+Compare is nished with any of the target drives you
can take out the nished drive and put another blank ash drive for
Copy+Compare.
Note: When Copy+Compare is in process the Green LED on the front
panel is blinking. Do not take out the drive while it is working. When
Copy+Compare is finished the Green LED stays on (no blinking). If an
error occurs during the process a Red LED will display.
Pass: 5 Working
Fail: 0 2
ESC
OK
ESC
OK
Compare 925M
15% 0:18 226M
ESC
OK
ENT
ESC
ENT
ESC
ENT
ESC
Total OK: 5 OK: 5 NG: 0
1:03 OK: 5 NG: 0