Filter
Top Products
Chapter 9: Problem Solving E–57
Message: PRINT DEMO PAGE
Meaning: Demo page is printing.
Message:
PRINT FONTS
Meaning: Typeface List page is printing.
Message:
PRINT MENU
Meaning: Menu page is printing.
Message:
PRINTING
Meaning: Data is being received and printed.
Message:
PROCESSING .xxx
Meaning: Data being received or processed. xxx = emulation
Message:
RESET
Meaning: Manual reset was initiated. All temporary fonts and macros are
deleted.
Message:
RESET TO FLUSH
Meaning: Printer was switched to off-line with data in buffer. Press RESET
to delete data.
Message:
RESET TO SAVE
Meaning: Press ᮣ/Reset to save menu changes. Menu changes cannot be
reset automatically because data is present in buffer.
Message:
STACKER FULL
REMOVE THE PAPER
Meaning: Rear paper exit bin is full. Printing is stopped until paper is
removed.
Message:
TONER EMPTY
REPLACE TNR CART.
Meaning: Toner cartridge is virtually empty and must be changed to avoid
print deterioration.
Message:
TONER LOW
Meaning: Appears on second line of display to indicate that toner is running
out. About 100 more pages can be printed after this message first
appears.
Message:
TONER SENSOR
Meaning: Appears in second line of display to indicate that a malfunction of
toner sensor has been detected.
Message:
tttttt INSTALL
Meaning: Tray tttttt is pulled out: reinsert tray.
Print Quality Problems
Before consulting a service representative regarding a print quality problem,
check the problems listed below to see if there is a solution, or something
you might have overlooked.
Blank sheets printed.
Reason: Image drum cartridge may have been exposed to light, or LED
array or image drum contacts may have failed.
Solution: Leave image drum cartridge in total darkness for several hours. If
this fails to restore it, install a new image drum cartridge.
Reason: Empty or missing toner cartridge.
Solution: Install new toner cartridge.
Entire page prints faintly.
Reason: Empty toner cartridge. Pages get fainter after toner is used up.
Solution: Install new toner cartridge.
Reason: LED array is dirty.
Solution: Clean the LED array.