Filter
Top Products
Installation and Safety Guide 35
613-000313 Rev C
Connecting Data Cables to AR440S, AR441S, AR442S
Connecting the router to your network:
1. Connect to the LAN
If you have not already done so, use straight-through Ethernet patch cables to
connect the device(s) on your private network (LAN) to the router’s switch
port(s). By default, all switch ports are members of VLAN1.
2. Connect to the WAN.
Caution If you intend to use a firewall, configure it before you activate
the WAN link.
Once initial configuration is complete, connect the router to the WAN:
• AR440S, AR441S, AR442S: Connect a PIC port to a WAN connection. See
the Port Interface Card Quick Install Guide and Hardware Reference.
• AR440S, AR441S: Using the DSL cable, connect the ADSL port to an ADSL
splitter that is connected to a digital subscriber line.
• AR442S: Using the DSL cable, connect the SHDSL port to the digital
subscriber line.