Allied Telesis AR400 series Network Router User Manual


 
Installation and Safety Guide 41
613-000313 Rev C
Safety
WARNING: In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
ELECTRICAL NOTICES
WARNING: ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove the cover. No user-serviceable parts
inside. This unit contains HAZARDOUS VOLTAGES and should only be opened by a
trained and qualified technician.
LIGHTNING DANGER
DANGER: DO NOT WORK on equipment or CABLES during periods of
LIGHTNING ACTIVITY.
CAUTION: POWER CORD IS USED AS A DISCONNECTION DEVICE. TO
DE-ENERGIZE EQUIPMENT, disconnect the power cord.
ELECTRICAL - TYPE CLASS 1 EQUIPMENT
THIS EQUIPMENT MUST BE EARTHED. Power plug must be connected to a
properly wired earth ground socket outlet. An improperly wired socket outlet could
place hazardous validates on accessible metal parts.
PLUGGABLE EQUIPMENT, the socket outlet shall be installed near the equipment
and shall be easily accessible.
CAUTION: Air vents must not be blocked and must have free access to the room
ambient air for cooling.
OPERATING TEMPERATURE: AR415S, AR450S: This product is designed for a
maximum ambient temperature of 40 degrees C.
AR440S, AR441S, AR442S: This product is designed for a maximum ambient
temperature of 50 degrees C.
ALL COUNTRIES: Install product in accordance with local and National
Electrical Codes.
ELECTRICAL - AC MAINS CIRCUIT OVERLOADING
When installing product, consideration must be given to the accumulative nameplate
ratings when connecting the equipment to the AC supply wiring.
Lithium Battery - Should only be changed by authorised service personnel.
CAUTION: Danger of explosion if battery incorrectly replaced. Replace only with
Lithium Battery, type CR2032, and dispose of in accordance with the manufacturer’s
recommendations and all local codes.