Filter
Top Products
Chapter 6: Modifying Advanced Properties
115
Receive Buffers
The Receive Buffers property specifies the number of packet receive
buffers allocated for the adapter port. Increasing this value may enhance
performance in receiving traffic, but consumes more system memory.
To change the Receive Buffers value, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 87.
2. Select Receive Buffers in the Property box.
The Receive Buffers page is displayed as shown in Figure 76.
Figure 76. Receive Buffers Page
3. Select one of the following options:
Default — The default number of receive buffers is allocated. This
is the default setting.
Maximum — The maximum number of receive buffers is allocated.
Maximum — The minimum number of receive buffers is allocated.
4. Click OK.