Filter
Top Products
AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide
96
Ethernet@WireSpeed
The Ethernet@WireSpeed feature connects two gigabit devices even
when the devices are connected through an impaired copper cable.
To view the Ethernet@WireSpeed setting, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 87.
2. Select Ethernet@WireSpeed in the Property box.
The Ethernet@WireSpeed page is displayed as shown in Figure 63.
Figure 63. Ethernet@WireSpeed Page
3. Select one of the following options if available:
Note
The options and default setting depend on your operating system
and the version of the driver that you installed.
Disable — The Ethernet@WireSpeed feature is disabled
Enable — The Ethernet@WireSpeed feature is enabled.
4. Click OK.