Filter
Top Products
AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide
126
VLAN ID
The VLAN ID property allows you to specify a VLAN ID on your network to
the adapter port. The adapter port adds the value of the VLAN ID to a
frame in the VLAN tag before transmitting the frame.
Note
When you install the AT-MUX utility on your system to bridge frames
from the copper port to the fiber port, set a VLAN ID in the AT-MUX
utility. See “Accessing the AT-MUX Utility” on page 69.
To change the VLAN ID value, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 87.
2. Select VLAN ID in the Property box.
The VLAN ID page is displayed as shown in Figure 85.
Figure 85. VLAN ID Page
3. Specify a VLAN ID in the Value box.
The range of the value is from 0 to 4094. The default value is 0.
4. Click OK.