Filter
Top Products
Chapter 4: Installing the AT-MUX Utility
69
Accessing the AT-MUX Utility
To configure the AT-MUX utility, do the following:
Note
The procedures for accessing the AT-MUX utility are slightly
different among Windows operating systems. The following
instructions is for Windows 7 operating system to show an example.
1. Start your Windows operating system and log in.
2. Access Control Panel.
Note
The procedures for accessing Control Panel are slightly different
among Windows operating systems. One common way is to left-
click Start button and select Control Panel from Start Menu.
Figure 47 shows an example of Control Panel.
Figure 47. Control Panel
3. Select Network and Internet.
Network and Internet appears as shown in Figure 48 on page 70.