Filter
Top Products
AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide
148
Overview
The fiber optic connector consists of a fiber optic plug and its adapter. The
end of the fiber optic cable is held in the core of the ferrule in the plug as
shown in Figure 95. Light signals are transmitted through the core of the
fiber.
Figure 95. Ferrule in an SC Connector Plug
Even minor smudges or dirt on the end face of the fiber, completely
invisible to the naked eye, can disrupt light transmission and lead to failure
of the component or of the entire system. Figure 96 shows part of the end
face of an unclean and clean ferrule.
Figure 96. Unclean and Clean Ferrule
Guidelines Here are general guidelines and warnings for fiber optic connectors:
Always keep a dust cap on a fiber optic cable when it is not in use.
Do not touch the end face of the ferrule in the connector.
Warning
Do not stare into the laser beam. 2
Warning
Do not look directly at the cable ends or inspect the cable ends with
an optical lens. 31
Ferrule
Unclean Clean