Filter
Top Products
Chapter 2: Installing the Hardware
33
Figure 15. Connecting the SATA Receptacle
8. Replace the system’s cover and secure it with the screws removed in
step 2.
9. Disconnect any personal antistatic devices.
10. Power the system on.
Note
If you installed the adapter card in Windows XP system before
installing the driver software, the Found New Hardware Wizard
launches automatically. For more information, see Chapter 3,
“Installing the Driver Software” on page 35.
When the system returns to proper operation, the adapter hardware is fully
installed. Next, connect the network cables. See “Connecting the Network
Cables” on page 34.