Filter
Top Products
Chapter 1: Overview
14
AT-8000GS/48 The following figure illustrates the AT-8000GS/48 front panel.
Figure 5 AT-8000GS/48 Gigabit Ethernet Switch Front Panel
The AT-8000GS/48 device front panel is configured as follows:
48 10/100/1000 Mbps ports — RJ-45 ports designated as 10/100/
1000Mbps Base-T. The RJ-45 ports are designated as Ports 1-48.
4 SFP Ports — There are four 1000Base-X SFP combo ports. These
ports are associated with the RJ-45 copper ports: 45, 46, 47, and 48.
Select Button — Selects the port LED indications.
The following figure illustrates the AT-8000GS/48 back panel.
Figure 6 AT-8000GS/48 Gigabit Ethernet Switch Back Panel
The AT-8000GS/48 back panel is configured as follows:
Power Connector — AC power supply interface.
2 Stacking Ports — Two HDMI connector stacking ports .
Console Port — An RJ-45 connector supporting the RS-232 electrical
specification.
Reset Button — Button to reset the device.
1338
SFP Ports
Mode
Button
Mode
LEDs
10/100/1000Base-T Ports
Power
LED
LED
Stacking
LEDs
10/100/1000Base-T Ports10/100/1000Base-T Ports
Diagnostic