Filter
Top Products
AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router User Manual 7
Unpacking the Wireless Router
To unpack the AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router, perform the following
procedure:
1. Remove all components from the shipping package.
Note: Store the packing material in a safe location. You must use the original shipping material
if you need to return the unit to Allied Telesis.
2. Place the router on a secure, level surface.
3. Ensure that the following hardware components are included in your router package. If any item
is missing or damaged, contact your Allied Telesis sales representative for assistance.
Package Contents
• One AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router
• Two antennas
• One AC adapter
• One RJ-45 cable
• Two rubber feet
• One installation guide
Antennas Installation
To install the antennas, perform the following procedure:
1. Remove the antennas from their package.
2. Locate the antenna connectors in the back of the AT-WR2304N IEEE 802.11 b/g/n, Small
Business Wireless Router, as shown in Figure 2.
Figure 2: Location of the Antenna Connectors
3. Screw antennas to antenna connectors, as shown in Figure 3.
Figure 3: Connecting Antennas