Filter
Top Products
50 AT-WR2304N - IEEE 802.11 b/g/n, Small Business Wireless Router - User Manual
“Max” is selected, the equipment restricts the rate under specific limitation.
) Rate(bps): Select a speed you want to allocate to the rule. Click on “Add” to add a rule.
) Current QoS Table: All QoS rules are listed here.
Note: You can remove a rule by checking the item and clicking on “Delete Selected”, or click on
“Delete All” to remove all rules.
Routing
Before you apply routing function, you need to disable NAT first.
Figure 92: Advanced > Routing
) Enable Static Routing: Check the box to enable this function.
) Destination LAN IP: Specify the destination LAN IP address of static routing rule.
) Subnet Mask: Input the subnet mask of the corresponding IP address.
) Default Gateway: Input the default gateway of destination.
) Hops:
Specify the Max Hops number of static routing rule.
) Interface: Select the interface here.
) Current Static Routing Table: All static routing rules are listed here.
Figure 93: Current Static Routing Table
Note: You can remove a rule by checking the item and clicking on “Delete Selected”, or click on
“Delete All” to remove all rules.
Tools
This page provides settings about password, time, DDNS, and firmware management. Please access by
clicking on the “Tools” on the left side.