Filter
Top Products
34 AT-WR2304N - IEEE 802.11 b/g/n, Small Business Wireless Router - User Manual
Figure 56: WDS Security Settings (AP2)
6. Unplug the RJ-45 cable, and set the PC to “Obtain an IP address automatically”.
Advanced
Figure 57: Wireless > Advanced
) Fragment Threshold: The maximum fragment size.
) RTS Threshold: The maximum RTS pocket size.
) Beacon Interval: The interval of AP beacon.
) DTIM Period: Delivery Traffic Indication Message. It is recommended keeping default value.
) Data rate: It is recommended keeping default value “Auto”.
) N Data rate: It is recommended keeping default value “Auto”.
) Channel Bandwidth: It is recommended keeping default value “Auto 20/40 MHz”.
) Preamble Type: You can switch between “Long Preamble” and “Short Preamble”.
) CTS Protection: It is recommended keeping default value “Auto”.
) Tx Power: Configure this parameter to limit signal range. The default value is “100%”.
Security
Please refer to Chapter 5: Security for the configuration.
Filter
You can protect the network from unauthorized wireless user by means of MAC address filter. Only listed
MAC address is allowed to connect to the AP.