Filter
Top Products
8 AT-WR2304N - IEEE 802.11 b/g/n, Small Business Wireless Router - User Manual
You can try repositioning antennas until you get the best signal strength.
Using the Wireless Router on a Desktop
You can place the AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router on a desktop or other
flat surface.
To place the AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router on a desktop, perform the
following procedure:
1. Turn the router over so that the top is resting on a flat surface.
2. Attach the two rubber feet to the bottom of the router as shown in Figure 4.
Figure 4: Attaching the Rubber Feet
3. Turn the router over and place it on a flat, secure surface such as a desk or table, leaving ample
space around the unit for ventilation.
Connecting the Wireless Router to the LAN
To connect the AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router to the LAN, perform the
following procedure:
Note: For the first configuration,
t
he
A
T-
W
R2304N IEEE 802.11 b/g/n, Small Business Wireless
Router needs to connect to a computer with a RJ-45 cable.
1. Locate the RJ-45 cable in the box.
2. Connect one end of the cable to a computer’s Ethernet card. You will use this computer for the
first configuration.
3. Connect the other end of the cable to one of the LAN ports on the back of the router, as shown
in Figure 5.