Filter
Top Products
AT-FH812u and AT-FH824u Software
8
Resetting the
System
Use the Reset command under the Main Menu to reset the agent.
Logging Off the
System
Use the Exit command under the Main Menu to exit the configuration program
and terminate communications with the switch for the current session.
Performing Basic
Configuration
After initially logging onto the system, use the Configuration Menu to adjust the
communication parameters for your console to ensure a reliable connection. Next,
set the Administrator and Guest passwords. Remember to record them in a safe
place. If you want to manage the hub with in-band management software, then
you also need to set the community string, which controls access to the Agent
Module.
The other items provided by the Configuration Menu are used to set specific
communication parameters for individual ports, enable RMON options, and
configure backup ports. Each setup screen provided by the Configuration menu is
described in the following sections.