Filter
Top Products
AT-FH812u and AT-FH824u User’s Guide
17
Table 9
Port Administration Status Control Parameters
Parameters Description
Admin State Allows you to disable a port due to abnormal behavior (e.g.,
excessive collisions), and then re-enable it after the problem has
been resolved. You may also disable a port for security reasons.
Link State Indicates if the port has a valid connection to an external device.
Partition Indicates if the port is partitioned.
Mode Sets the transmission speed to 10 Mbps, 100 Mbps or auto-
detection.
Speed Indicates the transmission speed currently used by this port.